Univers by FTE U3500 Guía de instalación descargar pdf (Pagina 12)

v.3500.1.6

Blue Wire - Switched Power

• With the vehicle’s engine OFF, use the voltmeter to locate an IGNITION line with switched

power and attach the Blue Wire to the line by splicing directly to the lead or by using a wire tap

(recommended).

• Do NOT use an inline fuse on this line.

• Do NOT use accessory Power.

• To determine a switched power source:

1) Ensure the Driver Door is OPEN

2) Select a wire

3) With vehicle’s engine OFF use voltmeter to measure the DC voltage on the wire. It should

show 0 VDC.

4) Start the engine and conrm that the voltage of the same wire

is 13.1 VDC or higher

5) Turn the vehicle’s engine OFF and conrm that the voltage of the same wire is 0 VDC

Connecting to Ground and Power

Networkeet Unit

Constant Power (Battery) Switched Power

Red Wire

Blue Wire

Black Wire

Ground

To complete installation proceed to next page

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Sin comentarios

Univers by FTE U3500 Guía de instalación Pagina 12